MAGNETIX

ML24200W-DRIVER-R

The LED driver must remain accessible for future maintenance or replacement. Do not install the driver above inaccessible dropped ceilings or inside partition walls.

Dimmable LED Driver (5 in 1 Dimming)
Triac/Phase, 1-10v, Potentionmeter
10V PWM 5 in 1 dimming
Constant Voltage
Input: 100-277V-2.3A max.
50/60Hz 0.95
Output: 24V - 8.33A 200W

1-10V
The LED driver is controlled by an external signal between 1 and 10V. Perfectly dimmable in a range from 10% to 100%. Applicable with many home automation systems. It is necessary to place a 1-10V actuator between the home automation system and the fixture. Two extra control wires are needed to connect 1-10V.

Measurements:
9.5" Long
4" Wide
2" Deep
4 Pounds

Login for Price Pin It Houzz